Woodpecker LED G Built-in Curing Light

Original Woodpecker Dental LED G Built-in Curing Light Lamp. Connect to Dental Unit. Three Modes: Full Power, Ramping, Pulse. 360 Degree Rotary. Resin not less than 4mm in 10 seconds. Wave Length 385nm-515nm Wide Spectrum. 1200mW/cm2 Light Intensity. Ergonomics Design. FDA Approved. One Year Warranty. 

Features

• FDA and CE0197 Certificated.
• Sealed, connect to dental unit.
• Three working modes: Full power, Ramping, Pulse
• 360 Degree rotary head, extend the possibility.
• Ergonomics design, optimize the hand-grip use.
• High power blue light LED.
• This device can cure composite resin not less than 4mm in 10 seconds.

• LED G adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time. This device is used to restore teeth and solidify material for whitening teeth.

Technical Parameter

• Power input: 100V to 240V~ 50Hz/60Hz
• Wave length: 385nm-515nm (Wide Spectrum) 
• Light intensity: 1000mW/cm2~1200mW/cm2
• Illumination range: diameter appr. 8mm
• Optical fiber dimensions: 12mm diameter, 22mm depth
• Dimensions: 1”×1”×10.2” (26×25×260mm)
• Net weight: 4.8oz (135g)

Three Working Modes

• Full power: the blue light radiates in full power.
• Ramping: The blue light power increases stronger continually, after five seconds reaches to the highest power.
• Pulse: The blue light works on the pulse condition. During the operation, aim blue solidification. The working time of all modes is ten seconds.

*Intermittent operation instrument: after work 200 seconds, stop 20 seconds, and then work 20 seconds, stop 20 seconds, work in the rule as above circularly.

Warranty

One year's free repair for the whole unit from the date of purchase. Lifetime maintenance.